 |
 |
 |
Planned Utility Right of Way maintenance
Trees contacting overhead power lines are a leading cause of outages and momentary interruptions and can be a safety concern. That is why WH also has a seasonal tree trimming maintenance program along WH’s power line routes.
Tree removal near power lines?
You can schedule a WH crew to disconnect your power line during regular business hours.
Where does W-H trim trees?
Members who have property along power line routes are occasionally asked to allow WH to trim their trees if it is necessary to reduce reliability concerns related to overhead power lines. WH also conducts an annual inspection of overhead power lines to determine if there are areas where trimming is needed.
Do you have a concern about a potential overhead power line hazard near your property?
Click here to report your concern to WH.
Note: WH is responsible to get the electricity to your meter. However, the mast on the house (the pipe in which the wires run down to the meter) panel is your responsibility. For example, if a tree damages the mast, an electrician will need to make repairs at your home. You can call your own electrician or our WH Response division can assist with coordinating repairs at 763-477-3000 or 800-943-2667.
Trimming on Your Property:
Because of the need to balance electric reliability and safety with aesthetics,
WH offers options when the cooperative needs to trim trees on a member's property. They include the following:
- Trim less than standard (shown in illustration)*
- Convert electric lines to underground*
- Relocate power lines*
- Cut down trees (Service provided at W-H’s expense)
- Relocate trees*
*Service provided at owner’s expense—one tree trim credit may apply
Brush cleaning:
WH contractors clean up brush from their regular maintenance trimming jobs. Property owners or homeowners are responsible for dead or diseased trees or brush/wood or clean up any debris resulting from a storm or emergency trimming.
Clearance needed for trees located near overhead power lines:
WH recommends a clearance of a minimum of 15 feet on all sides of the center conductor or pole-line.